中级
30 分钟

通过 RV5C387A 和 STM32L496AG 提升您的项目的 RTC 功能

永不停歇的时钟:认识我们的 RTC 奇迹!

RTC 17 Click with Discovery kit with STM32L496AG MCU

已发布 7月 22, 2025

点击板

RTC 17 Click

开发板

Discovery kit with STM32L496AG MCU

编译器

NECTO Studio

微控制器单元

STM32L496AG

体验高精度实时时钟解决方案,实现时间敏感操作的无缝同步。

A

A

硬件概览

它是如何工作的?

RTC 17 Click 基于 RV5C387A,这是一款由日新微电子公司提供的、优化用于低功耗操作的 I2C 可配置实时时钟/日历。RV5C387A 被配置为向 MCU 传输日历和时间数据,并具有集成的中断生成功能。它以从秒到日历年最后两位数的单位读取和写入 MCU 的时间数据。当日历年的最后两位数是 4 的倍数时,该年份将自动识别为闰年。因此,直到 2099 年的闰年都可以自动识别。该 Click board™ 使用标准 I2C 双线接口与 MCU 通信,以读取数据和配置设置,支持高达 400kHz 的快速模式操作。

它还包含一个报警电路,配置为在预设时间从其 A、B 或 C 中断引脚向 mikroBUS™ 插座的 INT 引脚生成中断信号。报警电路允许通过 Alarm_W 和 Alarm_D 寄存器指定两个报警设置。Alarm_W 寄存器(中断 B)允许设置星期、小时和分钟报警,包括多星期几设置的组合,例如星期一和星期三,而 Alarm_D 寄存器(中断 C)允许设置小时和分钟报警。此外,RV5C387A 除了可以从中断 A 引脚生成的报警电路中断信号外,还可以生成周期性中断信号。RTC 17 Click 还具有一个标记为 CLKO 的板载

连接器,提供 32kHz 的时钟脉冲。像这样的最常见 RTC 配置是电池备份,它在停电时保持时间并继续工作。正因如此,除了 BU9873 外,RTC 17 Click 还配备了一个与 3000TR 电池座兼容的纽扣电池座,适用于 12mm 纽扣电池。该 Click board™ 可以通过 VCC SEL 跳线选择 3.3V 或 5V 逻辑电压级别操作。这种方式,3.3V 和 5V 兼容的 MCU 都可以正确使用通信线路。此外,该 Click board™ 配备了包含易于使用的函数和示例代码的库,可用作进一步开发的参考。

RTC 17 Click hardware overview image

功能概述

开发板

32L496GDISCOVERY Discovery 套件是一款功能全面的演示和开发平台,专为搭载 Arm® Cortex®-M4 内核的 STM32L496AG 微控制器设计。该套件适用于需要在高性能、先进图形处理和超低功耗之间取得平衡的应用,支持无缝原型开发,适用于各种嵌入式解决方案。STM32L496AG 采用创新的节能架构,集成

了扩展 RAM 和 Chrom-ART 图形加速器,在提升图形性能的同时保持低功耗,使其特别适用于音频处理、图形用户界面和实时数据采集等对能效要求较高的应用。为了简化开发流程,该开发板配备了板载 ST-LINK/V2-1 调试器/编程器,提供即插即用的调试和编程体验,使用户无需额外硬件即可轻松加载、调

试和测试应用程序。凭借低功耗特性、增强的内存能力以及内置调试工具,32L496GDISCOVERY 套件是开发先进嵌入式系统、实现高效能解决方案的理想选择。

Discovery kit with STM32L496AG MCU double side image

微控制器概述 

MCU卡片 / MCU

STM32L496AG Image

建筑

ARM Cortex-M4

MCU 内存 (KB)

1024

硅供应商

STMicroelectronics

引脚数

169

RAM (字节)

327680

使用的MCU引脚

mikroBUS™映射器

NC
NC
AN
NC
NC
RST
NC
NC
CS
NC
NC
SCK
NC
NC
MISO
NC
NC
MOSI
Power Supply
3.3V
3.3V
Ground
GND
GND
NC
NC
PWM
Interrupt
PH2
INT
NC
NC
TX
NC
NC
RX
I2C Clock
PB8
SCL
I2C Data
PB7
SDA
Power Supply
5V
5V
Ground
GND
GND
1

“仔细看看!”

Click board™ 原理图

RTC 17 Click Schematic schematic

一步一步来

项目组装

Discovery kit with STM32H750XB MCU front image hardware assembly

从选择您的开发板和Click板™开始。以Discovery kit with STM32L496AG MCU作为您的开发板开始。

Discovery kit with STM32H750XB MCU front image hardware assembly
Thermo 21 Click front image hardware assembly
Prog-cut hardware assembly
Board mapper by product7 hardware assembly
Necto image step 2 hardware assembly
Necto image step 3 hardware assembly
Necto image step 4 hardware assembly
Necto image step 5 hardware assembly
Necto image step 6 hardware assembly
Discovery kit with STM32H750XB MCU NECTO MCU Selection Step hardware assembly
Necto No Display image step 8 hardware assembly
Necto image step 9 hardware assembly
Necto image step 10 hardware assembly
Necto image step 11 hardware assembly

实时跟踪您的结果

应用程序输出

1. 应用程序输出 - 在调试模式下,“应用程序输出”窗口支持实时数据监控,直接提供执行结果的可视化。请按照提供的教程正确配置环境,以确保数据正确显示。

2. UART 终端 - 使用UART Terminal通过USB to UART converter监视数据传输,实现Click board™与开发系统之间的直接通信。请根据项目需求配置波特率和其他串行设置,以确保正常运行。有关分步设置说明,请参考提供的教程

3. Plot 输出 - Plot功能提供了一种强大的方式来可视化实时传感器数据,使趋势分析、调试和多个数据点的对比变得更加直观。要正确设置,请按照提供的教程,其中包含使用Plot功能显示Click board™读数的分步示例。在代码中使用Plot功能时,请使用以下函数:plot(insert_graph_name, variable_name);。这是一个通用格式,用户需要将“insert_graph_name”替换为实际图表名称,并将“variable_name”替换为要显示的参数。

软件支持

库描述

该库包含 RTC 17 Click 驱动程序的 API。

关键功能:

  • rtc17_set_time - 该函数设置起始时间值 - 秒、分钟和小时。

  • rtc17_read_time - 该函数读取当前时间值 - 秒、分钟和小时。

  • rtc17_read_date - 该函数读取当前日期值 - 星期几、日期、月份和年份。

开源

代码示例

完整的应用程序代码和一个现成的项目可以通过NECTO Studio包管理器直接安装到NECTO Studio 应用程序代码也可以在MIKROE的GitHub账户中找到。

/*!
 * @file main.c
 * @brief RTC17 Click example
 *
 * # Description
 * This example demonstrates the use of RTC 17 Click board by reading and displaying
 * the time and date values.
 *
 * The demo application is composed of two sections :
 *
 * ## Application Init
 * Initializes the driver and logger and performs the Click default configuration
 * which sets 24h time mode and interrupt to be synchronized with second count-up.
 * And after that setting the starting time and date.
 *
 * ## Application Task
 * Waits for the second count-up interrupt and then reads and displays the current
 * time and date values on the USB UART.
 *
 * @author Stefan Filipovic
 *
 */

#include "board.h"
#include "log.h"
#include "rtc17.h"

static rtc17_t rtc17;
static log_t logger;
static rtc17_time_t time;
static rtc17_date_t date;

/**
 * @brief RTC 17 get day of week name function.
 * @details This function returns the name of day of the week as a string.
 * @param[in] ctx : Click context object.
 * See #rtc17_t object definition for detailed explanation.
 * @param[in] day_of_week : Day of week decimal value.
 * @return Name of day as a string.
 * @note None.
 */
static char *rtc17_get_day_of_week_name ( uint8_t day_of_week );

void application_init ( void ) 
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    rtc17_cfg_t rtc17_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    rtc17_cfg_setup( &rtc17_cfg );
    RTC17_MAP_MIKROBUS( rtc17_cfg, MIKROBUS_1 );
    if ( I2C_MASTER_ERROR == rtc17_init( &rtc17, &rtc17_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( RTC17_ERROR == rtc17_default_cfg ( &rtc17 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    time.hour = 23;
    time.minute = 59;
    time.second = 50;
    if ( RTC17_OK == rtc17_set_time ( &rtc17, &time ) )
    {
        log_printf( &logger, " Set time: %.2u:%.2u:%.2u\r\n", 
                    ( uint16_t ) time.hour, ( uint16_t ) time.minute, ( uint16_t ) time.second );
    }
    date.day_of_week = RTC17_SATURDAY;
    date.day = 31;
    date.month = 12;
    date.year = 22;
    if ( RTC17_OK == rtc17_set_date ( &rtc17, &date ) )
    {
        log_printf( &logger, " Set date: %s, %.2u.%.2u.20%.2u.\r\n", 
                    rtc17_get_day_of_week_name ( date.day_of_week ),
                    ( uint16_t ) date.day, ( uint16_t ) date.month, ( uint16_t ) date.year );
    }
    
    
    log_info( &logger, " Application Task " );
}

void application_task ( void ) 
{
    // Wait for interrupt which is synchronized with second count-up
    while ( rtc17_get_int_pin ( &rtc17 ) );
    
    rtc17_clear_interrupts ( &rtc17 );
    if ( RTC17_OK == rtc17_read_time ( &rtc17, &time ) )
    {
        log_printf( &logger, " Time: %.2u:%.2u:%.2u\r\n", 
                    ( uint16_t ) time.hour, ( uint16_t ) time.minute, ( uint16_t ) time.second );
    }
    if ( RTC17_OK == rtc17_read_date ( &rtc17, &date ) )
    {
        log_printf( &logger, " Date: %s, %.2u.%.2u.20%.2u.\r\n\n", 
                    rtc17_get_day_of_week_name ( date.day_of_week ),
                    ( uint16_t ) date.day, ( uint16_t ) date.month, ( uint16_t ) date.year );
    }
}

int main ( void ) 
{
    /* Do not remove this line or clock might not be set correctly. */
    #ifdef PREINIT_SUPPORTED
    preinit();
    #endif
    
    application_init( );
    
    for ( ; ; ) 
    {
        application_task( );
    }

    return 0;
}

static char *rtc17_get_day_of_week_name ( uint8_t day_of_week )
{
    switch ( day_of_week )
    {
        case RTC17_MONDAY:
        {
            return "Monday";
        }
        case RTC17_TUESDAY:
        {
            return "Tuesday";
        }
        case RTC17_WEDNESDAY:
        {
            return "Wednesday";
        }
        case RTC17_THURSDAY:
        {
            return "Thursday";
        }
        case RTC17_FRIDAY:
        {
            return "Friday";
        }
        case RTC17_SATURDAY:
        {
            return "Saturday";
        }
        case RTC17_SUNDAY:
        {
            return "Sunday";
        }
        default:
        {
            return "Unknown";
        }
    }
}

// ------------------------------------------------------------------------ END

额外支持

资源

喜欢这个项目吗?

'购买此套件' 按钮会直接带您进入购物车,您可以在购物车中轻松添加或移除产品。