Intermediate
30 min

Add interactive sound elements to various projects using TM4C129ENCPDT and CMT-8540S-SMT

Blasting through noise: The resonant power of modern buzzers

BUZZ 2 Click with Fusion for Tiva v8

Published Oct 23, 2023

Click board™

BUZZ 2 Click

Dev Board

Fusion for Tiva v8

Compiler

NECTO Studio

MCU

TM4C129ENCPDT

Discover how our buzzer solution can revolutionize your daily life, from enhancing home security to streamlining industrial processes

A

A

Hardware Overview

How does it work?

BUZZ 2 Click is based on the CMT-8540S-SMT, a magnetic buzzer transducer from CUI Devices. The buzzer's resonant frequency is 4kHz. The click is designed to run on either a 3.3V or 5V power supply. The PWM pin on the mikroBUS™ line controls the CMT-8540S-SMT magnetic buzzer. You can create different sound patterns using

the Sound library supported in our compilers or utilize the microcontroller's internal PWM module to create the signal for the buzzer. Signal frequency determines the sound pitch, and the duty cycle determines the amplitude (sound volume). This Click board™ can operate with either 3.3V or 5V logic voltage levels selected via the

VCCIO SEL jumper. This way, both 3.3V and 5V capable MCUs can use the communication lines properly. Also, this Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used as a reference for further development.

BUZZ 2 Click top side image
BUZZ 2 Click bottom side image

Features overview

Development board

Fusion for TIVA v8 is a development board specially designed for the needs of rapid development of embedded applications. It supports a wide range of microcontrollers, such as different 32-bit ARM® Cortex®-M based MCUs from Texas Instruments, regardless of their number of pins, and a broad set of unique functions, such as the first-ever embedded debugger/programmer over a WiFi network. The development board is well organized and designed so that the end-user has all the necessary elements, such as switches, buttons, indicators, connectors, and others, in one place. Thanks to innovative manufacturing technology, Fusion for TIVA v8 provides a fluid and immersive working experience, allowing access

anywhere and under any circumstances at any time. Each part of the Fusion for TIVA v8 development board contains the components necessary for the most efficient operation of the same board. An advanced integrated CODEGRIP programmer/debugger module offers many valuable programming/debugging options, including support for JTAG, SWD, and SWO Trace (Single Wire Output)), and seamless integration with the Mikroe software environment. Besides, it also includes a clean and regulated power supply module for the development board. It can use a wide range of external power sources, including a battery, an external 12V power supply, and a power source via the USB Type-C (USB-C) connector.

Communication options such as USB-UART, USB HOST/DEVICE, CAN (on the MCU card, if supported), and Ethernet is also included. In addition, it also has the well-established mikroBUS™ standard, a standardized socket for the MCU card (SiBRAIN standard), and two display options for the TFT board line of products and character-based LCD. Fusion for TIVA v8 is an integral part of the Mikroe ecosystem for rapid development. Natively supported by Mikroe software tools, it covers many aspects of prototyping and development thanks to a considerable number of different Click boards™ (over a thousand boards), the number of which is growing every day.

Fusion for Tiva v8 horizontal image

Microcontroller Overview

MCU Card / MCU

default

Type

8th Generation

Architecture

ARM Cortex-M4

MCU Memory (KB)

1024

Silicon Vendor

Texas Instruments

Pin count

128

RAM (Bytes)

262144

Used MCU Pins

mikroBUS™ mapper

NC
NC
AN
NC
NC
RST
NC
NC
CS
NC
NC
SCK
NC
NC
MISO
NC
NC
MOSI
Power Supply
3.3V
3.3V
Ground
GND
GND
PWM Buzzer Control
PL4
PWM
NC
NC
INT
NC
NC
TX
NC
NC
RX
NC
NC
SCL
NC
NC
SDA
Power Supply
5V
5V
Ground
GND
GND
1

Take a closer look

Schematic

BUZZ 2 Click Schematic schematic

Step by step

Project assembly

Fusion for PIC v8 front image hardware assembly

Start by selecting your development board and Click board™. Begin with the Fusion for Tiva v8 as your development board.

Fusion for PIC v8 front image hardware assembly
Buck 22 Click front image hardware assembly
SiBRAIN for PIC32MZ1024EFK144 front image hardware assembly
v8 SiBRAIN MB 1 - upright/background hardware assembly
Necto image step 2 hardware assembly
Necto image step 3 hardware assembly
Necto image step 4 hardware assembly
NECTO Compiler Selection Step Image hardware assembly
NECTO Output Selection Step Image hardware assembly
Necto image step 6 hardware assembly
Necto image step 7 hardware assembly
Necto image step 8 hardware assembly
Necto image step 9 hardware assembly
Necto image step 10 hardware assembly
Necto PreFlash Image hardware assembly

Track your results in real time

Application Output via UART Mode

1. Once the code example is loaded, pressing the "FLASH" button initiates the build process, and programs it on the created setup.

2. After the programming is completed, click on the Tools icon in the upper-right panel, and select the UART Terminal.

3. After opening the UART Terminal tab, first check the baud rate setting in the Options menu (default is 115200). If this parameter is correct, activate the terminal by clicking the "CONNECT" button.

4. Now terminal status changes from Disconnected to Connected in green, and the data is displayed in the Received data field.

UART_Application_Output

Software Support

Library Description

This library contains API for BUZZ 2 Click driver.

Key functions:

  • buzz2_set_duty_cycle - BUZZ 2 sets PWM duty cycle

  • buzz2_play_sound - Play sound function

  • buzz2_pwm_start - BUZZ 2 start PWM module

Open Source

Code example

This example can be found in NECTO Studio. Feel free to download the code, or you can copy the code below.

/*!
 * @file main.c
 * @brief Buzz2 Click example
 *
 * # Description
 * This example demonstrates the use of Buzz 2 click boards.
 *
 * The demo application is composed of two sections :
 *
 * ## Application Init
 * Initializes the driver and logger.
 *
 * ## Application Task
 * Plays the Imperial March melody. Also logs an appropriate message on the USB UART.
 *
 * @note
 * The minimal PWM Clock frequency required for this example is the frequency of tone C6 - 1047 Hz. 
 * So, in order to run this example and play all tones correctly, the user will need to decrease 
 * the MCU's main clock frequency in MCU Settings for the certain architectures
 * in order to get the required PWM clock frequency.
 * 
 * @author Jelena Milosavljevic
 *
 */

#include "board.h"
#include "log.h"
#include "buzz2.h"

#define W 4*Q // Whole 4/4 - 4 Beats
#define H 2*Q // Half 2/4 - 2 Beats 
#define Q 250 // Quarter 1/4 - 1 Beat
#define E Q/2 // Eighth 1/8 - 1/2 Beat
#define S Q/4 // Sixteenth 1/16 - 1/4 Beat

#define VOLUME 100 // goes up to 1000

static buzz2_t buzz2;
static log_t logger;

static void imperial_march( ) 
{
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_F6, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, S );
    Delay_ms ( 1 + S );
    
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_F6, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, H );
    Delay_ms ( 1 + H );
    
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_E7, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_E7, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_E7, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_F7, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, S );
    Delay_ms ( 1 + S );
    
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Ab6, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_F6, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, H );
    Delay_ms ( 1 + H );
    
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A7, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A7, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Ab7, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_G7, VOLUME, S );
    Delay_ms ( 1 + S );
    
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Gb7, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_E7, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_F7, VOLUME, E );
    Delay_ms ( 1 + E );
    Delay_ms ( 1 + E );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Bb6, VOLUME, E );
    Delay_ms ( 1 + E );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Eb7, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_D7, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Db7, VOLUME, S );
    Delay_ms ( 1 + S );
    
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_B6, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, E );
    Delay_ms ( 1 + E );
    Delay_ms ( 1 + E );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_F6, VOLUME, E );
    Delay_ms ( 1 + E );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Ab6, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_F6, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, S );
    Delay_ms ( 1 + S );
    
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_E7, VOLUME, H );
    Delay_ms ( 1 + H );
    
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A7, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A7, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Ab7, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_G7, VOLUME, S );
    Delay_ms ( 1 + S );
    
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Gb7, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_E7, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_F7, VOLUME, E );
    Delay_ms ( 1 + E );
    Delay_ms ( 1 + E );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Bb6, VOLUME, E );
    Delay_ms ( 1 + E );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Eb7, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_D7, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Db7, VOLUME, S );
    Delay_ms ( 1 + S );
    
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_B6, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, E );
    Delay_ms ( 1 + E );
    Delay_ms ( 1 + E );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_F6, VOLUME, E );
    Delay_ms ( 1 + E );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Ab6, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_F6, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, S );
    Delay_ms ( 1 + S );
    
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_A6, VOLUME, Q );
    Delay_ms ( 1 + Q );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_F6, VOLUME, E + S );
    Delay_ms ( 1 + E + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_C7, VOLUME, S );
    Delay_ms ( 1 + S );
    buzz2_play_sound(&buzz2, BUZZ2_NOTE_Ab6, VOLUME, H );
    Delay_ms ( 1 + H );
}

void application_init ( void ) {
    log_cfg_t log_cfg;  /**< Logger config object. */
    buzz2_cfg_t buzz2_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.

    buzz2_cfg_setup( &buzz2_cfg );
    BUZZ2_MAP_MIKROBUS( buzz2_cfg, MIKROBUS_1 );
    err_t init_flag  = buzz2_init( &buzz2, &buzz2_cfg );
    if ( init_flag == PWM_ERROR ) {
        log_error( &logger, " Application Init Error. " );
        log_info( &logger, " Please, run program again... " );

        for ( ; ; );
    }

    buzz2_set_duty_cycle ( &buzz2, 0.0 );
    buzz2_pwm_start( &buzz2 );
    Delay_ms ( 100 );

    log_info( &logger, " Application Task " );
}

void application_task ( void )
{
    log_printf( &logger, "Playing the Imperial March melody ...\r\n" );
    imperial_march( ); 
    // 10 seconds delay
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
    Delay_ms ( 1000 );
}

int main ( void ) 
{
    /* Do not remove this line or clock might not be set correctly. */
    #ifdef PREINIT_SUPPORTED
    preinit();
    #endif
    
    application_init( );
    
    for ( ; ; ) 
    {
        application_task( );
    }

    return 0;
}

// ------------------------------------------------------------------------ END

Additional Support

Resources

Love this project?

'Buy This Kit' button takes you directly to the shopping cart where you can easily add or remove products.

About usLegalPrivacy

Copyright © 2024 MIKROE. All rights reserved.